Why Is My LG Washing Machine Not Turning On – it is a frustrating problem I have helped many people solve.
Nothing’s worse than a pile of dirty laundry and a washer that won’t cooperate.
After years of researching and experiencing LG washer issues, I have identified the most common causes and their solutions.
The good news is that most problems have simple fixes you can handle yourself without calling a repair service.
Let me walk you through the troubleshooting steps that work most consistently, starting with the basics and moving to more complex solutions.
Key Takeaways:
- Most LG washer power issues have simple solutions
- Check power connection, cord integrity, and circuit breaker first
- Door switch and water supply problems are common culprits
- Overloading can trigger safety features preventing startup
Why Is My LG Washing Machine Not Turning On?
I’ve fixed tons of LG washers, and let me tell you—when they won’t turn on, it’s usually something pretty simple!
Here’s what I’ve learned from dealing with these machines.
1. Power Connection Issues
You know what happens a lot? People forget to check if it’s plugged in properly (I know, I’ve done it myself 😅). Sometimes the cord gets loose when you’re moving stuff around.
When addressing a non-operational washing machine, the initial diagnostic procedure involves verifying the integrity of the electrical power source.
Solution:
- Ensure that the washer is plugged into a functioning outlet. You can test the outlet by plugging it into another device.
- If using an extension cord, try plugging the washer directly into the wall, as extension cords may not effectively handle the washer’s power requirements.
2. Faulty Power Cord
Inspect the power cord for any visible damage or fraying. A damaged power cord can prevent the machine from receiving electricity. If you find any issues, replacing the power cord may be necessary.
Case Study: I had a friend who ignored a frayed cord once, and their machine was acting all weird—it wouldn’t even turn on sometimes! If you notice anything funky with the cord, like if it’s all beat up or wonky-looking, you’re probably going to need to swap it out for a new one. Better safe than sorry, right?
If you want to know how I change my washing machine cord, simply you can watch this video for quick steps and exchange it with own hands,
3. Tripped Circuit Breaker
A tripped circuit breaker is a common reason for power loss in appliances.
let’s check that circuit breaker! Do you know where your home’s breaker panel is at? Find the one that’s labelled for your washing machine. Sometimes these things trip and end up stuck in this weird middle position.
Just flip it off (like completely off), wait a second, then push it back to on. This usually does the trick and gets your power flowing again!
Now, if that didn’t work, we gotta make sure your outlet isn’t being stubborn.
Here’s a quick trick – grab your phone charger or something else you know works and plug it in to test the outlet. If whatever you plug in works fine, then we know the outlets are good.
Oh and one more thing – I see this mistake a lot… if you’re using an extension cord, that might be your problem right there! Those things just can’t handle how much power washers need sometimes. Try plugging your washing machine straight into the wall outlet instead.
If your washer is plugged into a GFCI outlet, press the reset button on the outlet to ensure that it hasn’t tripped.
4. Defective Door Switch
Door switch is a crucial safety feature in washing machines. It ensures that washing machine can’t operate unless door is securely closed.
When I face this problem with my domestic LG washing machine I change the door switch myself.
First I suggest switching OFF your appliance “This is mandatory”, Unplug it from the main outlet.
After that you need to remove the outer retaining band from the door seal, use a flathead screwdriver simply push down the spring mechanism then work it around the door seal to remove it, you can push the door seal inside the appliance to gain access to the door lock.
Remove the door lock device from the machine and place the new door lock device on a washing machine.
If the door switch is defective or malfunctioning, the washing machine may not turn on even if the door appears to be closed.
- Check if the door is completely closed and free from obstructions. If it appears closed but still won’t start, the door switch may be defective and require replacement.
5. Water Supply Issues
How frustrating is it when your washing machine just sits there doing nothing? Most times, it’s just a water supply thing.
Here’s what I always check first:
- Take a peek at the water valves behind your machine – both hot and cold ones be turned on. Just give them a good twist clockwise til they won’t turn any more.
- Next, check the hoses. They’re like straws for your washer, and if they’re bent or twisty, the water won’t flow right. I usually just run my hands along them to feel for any spots. Sometimes, they get squished against the wall, too, so make sure there’s enough space back there.
- Don’t forget about them inlet filters! These little guys are like tiny strainers that catch all the gunk before it gets in your machine. They can get pretty nasty over time – I found all sorts of stuff in mine last time I checked. If they’re all gunked up, just give them a good cleaning.
6. Malfunctioning Control Board
If all other components seem functional, there may be an issue with the control board.
- Try performing a hard reset by unplugging the washer, holding down the power button for about five seconds, and then plugging it back in.
- If this does not resolve the issue, professional assistance may be required to diagnose control board problems or other internal failures.
7. Overloaded Machine
when your washing machine’s acting up and won’t start, it’s usually cause you’ve stuffed too many clothes in there.
these machines have this built-in safety thing where they’ll just refuse to work if they’re too full (pretty smart, right?).
Just like my mom always says, “Less is more!” Just take out some of those clothes until it’s about 3/4 full, and you should be good to go!
Quick fix: grab a few things out of there and hit that start button again.
What to do next:
first thing you need to do is get the manual that came with your LG washer. I know, I know, nobody likes to read manuals, but trust me – it has some really helpful stuff in it about what might be wrong with your specific model. It will save you from doing something that could make things worse!
If the manual is not helping and you are still scratching your head, don’t worry! Just call LG’s customer service people.
They’ve helped a lot of people with the exact same problems and they’re really good at telling you solutions over the phone.
if things seem little complicated (like if your machine is making weird noises or leaking everywhere), you might want to save yourself the headache and call a repair person.
Yes, it will cost you some money, but that is better than accidentally breaking something while trying to fix it yourself!
