Fix Frigidaire Refrigerator Error Code OP: A Quick Guide

If you’re dealing with a Frigidaire refrigerator error code OP, you’re not alone.

I’ve researched and experienced many common appliance issues. Figuring out these codes can feel overwhelming, but it’s often simpler than it seems, especially when it comes to the wire harness.

In this guide, I’ll break down what this error means and how you can fix it yourself.

You don’t need to be a technician to troubleshoot and solve most refrigerator problems.

With the right information, anyone can get their fridge back in working order.

I’m here to make that process as easy and stress-free as possible.

You’ll learn step-by-step solutions that are quick, safe, and effective. I’ll share tips to help you prevent this issue from happening again.

Key Takeaways

• Main causes: Faulty temperature sensor, loose wiring, damaged sensor, faulty control board, or incorrect sensor resistance
• DIY fixes include checking wiring connections and testing/replacing the temperature sensor
• Professional help may be needed for complex issues like control board replacement

Main Causes of Frigidaire Refrigerator Error Code OP

The Frigidaire refrigerator error code OP typically indicates an issue with the refrigerator door being open.

However, if the OP error code persists even when both doors are firmly shut, it could be caused by the following main issues:

Faulty temperature sensor

You’re dealing with that annoying OP error on your Frigidaire fridge, huh? Let me tell you, it’s usually the temperature sensor acting up.

It’s supposed to keep an eye on how cold it is inside, but when it goes haywire, it starts telling the control board that the door’s open even when it ain’t.

Solution, you can try fixing it yourself.

First things first, unplug that bad boy. Then you have got to hunt down the sensor. It’s usually hanging out in the fridge or freezer part, but check your manual if you can’t find it.

Take a good look at the wires. If they look janky or loose, that could be your problem right there with the temperature display. If everything looks okay, you might need to test the sensor with a multimeter.

Replacing it ain’t too hard, especially if you have the model number handy. Just yank out the old one and pop in the new one.

Plug it back in and cross your fingers that the OP error’s gone for good, or else check the main control board. If it’s still there, well, you might need to dig deeper into that control board.

Loose wiring

So I had this issue with my Frigidaire fridge the other day – it was showing this weird OP error code. Turns out, it’s all about loose wiring between the temp sensor and control board.

So, basically, the temp sensor’s job is to keep an eye on how cold the fridge is and tell the control board. But when the wires get all wonky, it messes up the communication.

The control board gets confused and thinks the door’s open even when it ain’t. That’s when you see that annoying OP code pop up on the temperature display.

I figured out how to fix it myself and lemme tell you, it’s not rocket science. First things first, unplug that sucker. Then you gotta find the temp sensor. It’s usually inside the fridge or behind the back panel if you’re brave enough to look there.

Take a good look at the wires going from the sensor to the control board. If you see any loose ones, just give them a gentle pushback in place. Make sure they’re snug, you know?

Once you’ve got everything all tightened up, plug it back in and cross your fingers, hoping the ice maker works. If you did it right, that pesky OP code should be gone!

Damaged temperature sensor

Your Frigidaire fridge’s giving you the OP error, huh? Chances are, it’s the temperature sensor acting up. These little guys are supposed to keep an eye on how cold it is inside, but when they’re busted, the control board gets all confused and thinks the door’s been left open.

Locating and removing the fridge evaporator temperature sensor.

Wanna try fixing it yourself? It ain’t too hard! Here’s what you gotta do:

First, unplug that fridge! Safety first, ya know? Look for the sensor near the top of the refrigerator temperature area. It’s usually hanging out there.

Now, you gotta disconnect it from the wires and take it outta its spot. If you’ve got a multimeter lying around, check the resistance – should be about 11,304 ohms at room temp. If it’s showing infinite resistance in the evaporator fan, time for a new one!

Bench testing the old & new temperature sensor.

Order a replacement for the ice maker from the manufacturer or somewhere reputable. 

Once you’ve got the new sensor, just pop it in where the old one was and hook up the wires again. Plug your fridge back in and cross your fingers that OP error’s gone!

Faulty electronic control board

Sometimes the electronic control board goes haywire and can’t read the temperature sensor right. It’s like the board’s got its wires crossed, ya know?

This board is supposed to use the sensor to figure out if your fridge or freezer door is shut, which affects the timer.

But if it’s messed up, it might think the door’s open when it ain’t. That’s when you see that annoying OP code pop up on the refrigerator temperature display screen.

Wanna try fixing it yourself? Here’s what you can do:

First things first, unplug that sucker. Safety first, right?

Take a peek at the wires connecting the temp sensor to the control board. Are any of them loose or looking funky?

Grab a multimeter if you have one. Check the temp sensor’s resistance. At room temp, it should be around 11,304 ohms. If it’s way off or showing infinite resistance, your sensor’s probably toast.

If the sensor’s busted, swap it out for a new one.

But if the sensor seems fine, the control board might be the culprit. You might need to replace that bad boy.

Just remember, this stuff can get tricky. Don’t be afraid to call in a pro if you’re not feeling confident. Better safe than sorry, especially when it comes to your fridge!

Incorrect temperature sensor resistance

Did you get an OP error on your Frigidaire fridge? It’s all about the temp sensor acting up.

When the sensor’s resistance is off, it throws this error. Like, at room temp, it should read around 11,304 ohms. 

Normal readings: ~11,304 ohms (room temp), 32,566 ohms (32°F), 28,300 ohms (37°F)

At 32°F, it’s supposed to be 32,566 ohms, and at 37°F, about 28,300 ohms. If it ain’t close to these, your fridge’s gonna freak out and the user interface might show an error.

The control board gets all confused when the sensor’s resistance is wrong. It can’t tell the right temperature, so your fridge might not cool properly.

Usually, it’s either messed up wiring or the sensor itself is busted. Either way, the control board aint getting the right info.

I had this happen to me once, and let me tell you, it was a pain. But once you know what’s going on, it’s not too bad to fix.

Just gotta check those connections and maybe replace the sensor if it’s toast. Don’t let it scare you – fridges can be temperamental sometimes!

How to get rid of power outage notification on a Frigidaire refrigerator?

You are dealing with that annoying power outage notification on your Frigidaire refrigerator, huh? No worries, I got you! First things first, let’s talk about which model you have.

If you’re rocking the Frigidaire Gallery Side by Side, then we’re on the same page.

One thing to check is whether the fridge door is open or if you’ve accidentally removed the ice maker, which sometimes messes with the system.

If the issue persists, you might be staring at an error code, an error op on the refrigerator display.

Alright, moving on to the techy stuff. A common culprit could be the freezer temperature sensor or the refrigerator temperature sensor.

To fix this, you’ll need to unplug the refrigerator before you start poking around. Safety first, yo! Next, locate the freezer temperature sensor.

It’s usually at the back of the freezer compartment. You’re going to need a multimeter to check if the sensor has shorted.

If the reading is off, then bingo! The sensor or the electronic control panel might need to be replaced.

If you’re seeing a code error op or sh error code on the temperature display screen, it could definitely be a sensor issue. Double-check if the freezer door is open as that can also trigger these error codes.

If all this sounds like too much hassle, it might be time to call in the pros.

Contacting appliance service could save you a ton of headaches and ensure your Frigidaire Gallery fridge is back to chillin’ in no time.

FAQs