FF Error Code LG Washing Machine | Washer Simple Fixes

I’m a washing machine expert, but I’ve researched this issue pretty thoroughly.

Dealing with those pesky error codes can be a real pain, I know. But don’t worry, I’m here to walk you through some simple fixes.

First things first, let’s talk about that dreaded FF error code. Chances are, it’s probably something to do with your water supply.

Have you checked the inlet hoses? Make sure they’re not clogged or kinked. If that doesn’t do the trick, it could be a problem with the water pressure.

Try adjusting the pressure switch and see if that clears things up. And hey, if all else fails, you might need to call in a pro.

But I’m confident you can tackle this like a pro yourself. Good luck!

Key Takeaways:

• The FF error code on an LG washing machine typically indicates freezing issues.
• Common causes include frozen drain hoses, water supply hoses, or components in a cold environment.
• Solutions involve thawing frozen parts, cleaning drain filters, and checking for blockages.

Common Cause of FF Error Code LG Washing Machine

Frozen drain hose or drain pump

Drain hose or drain pump may be frozen, preventing proper drainage. To fix this, supply warm water into the drum to unfreeze the drain hose and pump.

We’ve seen this FF error on our LG washers alot, and usually its cause by a frozen drain hose or pump. Don’t worry, we can fix this!

First thing to do is thaw out that frozen part. Pour some warm water (about 50-60°C) into the drum and shut the door.

Now we gotta wait a bit – give it an hour or two to really thaw everything out good. Once thawed, we can ensure no new LG washing machine error codes appear.

Once it’s thawed, let’s check that drain hose for any blockages that might cause washing machine errors.

Make sure its not all kinked up or bent weird. Sometimes stuff gets stuck in there too, so check for that. We wanna spread it out nice so the water can flow smooth.

If we’re still having trouble, maybe the drain filters clogged up. We’ll need to give that a good cleaning.

Frozen water supply hose

Water supply hose may be frozen, preventing water from entering the machine. Wrap the supply hose in a warm, wet towel to defrost it.

if you’re seeing that FF error on your LG washer, it might be bcause your water hose is frozen solid. We’ve dealt with this before, and here’s what we did to fix it:

First off, you gotta take that hose off the machine. Then, we just soaked it in warm water – but not too hot! Keep it under 50°C or you’ll mess it up. Once it’s all thawed out, put it back on real tight.

Don’t forget to check them filters too. If they’re icy, just wrap them up in some warm towels.

When you’ve got everything hooked back up, turn on the faucet and make sure water’s flowing good. Then fire up the washer and see if that pesky FF code is gone.

Low temperature

If the washing machine is located in a very cold environment, the low temperature can cause components to freeze up. Move the machine to a warmer location.

If your washing machine’s in a really cold place, the low temp can freeze up stuff like the water hose, drain hose, or drain pump. This stops water flowing and draining right, which makes the FF error pop up.

How we can fix this FF error from the cold:

1. Let’s move the machine somewhere warmer. We want it above freezing like room temp is good.
2. We can pour warm water straight into the drum. Just run a Rinse+Spin and add the warm water – that’ll help thaw frozen parts.
3. Wrap a warm, wet towel around the water and drain hoses. Leave it there for like 5-10 mins to defrost it.
4. We should check and clean the drain filter too. A clogged filter makes freezing worse.
5. If we’re still having trouble, we might need to get a tech to look at the thermistor, water level sensor, or other inside bits that could be messing up from the cold.

Clogged drain filter

Clogged drain filter can prevent proper drainage and lead to freezing. Clean the drain filter.

We’ve all been there – ya open the washer and see that dreaded FF error code. Ugh! But don’t worry, we got this. Usually, it’s just a clogged drain filter messin’ things up.

Here’s how we can fix it ourselves:

Let’s open up that little panel on the front bottom of the machine to diagnose any potential washing machine errors.

You’ll see the drain pump filter – turn it to the left to take it out.

Now grab a brush and give that filter a good scrub to get all the gunk off. Once it’s clean, pop it back in and turn it right til it’s tight.

Close up the panel and we’re almost done! Just run a quick spin cycle to make sure everything is working right.

Faulty thermistor

The thermistor, which measures water temperature, may be malfunctioning and causing the freezing issue, leading to LG washing machine error codes. The thermistor may need to be replaced.

We’ve had this problem with our LG washer before – that annoying FF error code. It’s usually cuz of a messed up thermistor. That little thing’s job is to keep tabs on the temp inside the appliance. When it goes haywire, the machine can’t figure out how hot the water is.

To fix it, here’s what we did:

First, take off the back panel. 4 screws is holding it on. Once you got that off, look for the thermistor on the right of the heating doohickey. Unplug it and pull it out.

Now, grab a multimeter and check it’s resistance. Should be around 40,000 ohms at 85°F. If it’s way off, you gotta replace it. Make sure you got the right model number for your washer before buying a new one.

When you got the new part, just plug it back in where the old one was. Then slap that back panel on again.

Faulty water level sensor

A faulty water level sensor can also contribute to freezing issues, possibly displaying LG washing machine error codes. The sensor may need to be replaced.

We’ve seen this FF error on LG washers before – it’s usually cuz something’s frozen up. One thing that often causes it is a water level sensor thats not working right.

When the sensor’s messed up, it can’t tell how much water is in there, which can make stuff freeze and trigger LG washing machine error codes.

Here’s how we can check and fix it:

1. Put the machine in test mode and look at the sensor. It should read about 255 when empty and 214 when full of water.
2. Get your multimeter out and check between pins 1 and 3. You want to see 21-23 ohms.

If its not reading right, we’re gonna need to swap it out. Don’t worry, these sensors ain’t too expensive – usually under 50 bucks.

To replace it, we just gotta carefully take the old one off and put the new one on. Make sure you connect it good.

After we’ve put in the new sensor, let’s run a test cycle to make sure that pesky FF error is gone and everything’s working like it should. This will ensure no LG washing machine error codes are displayed.

Faulty main control board

In some cases, a problem with the main control board can cause the FF error code. The control board may need to be replaced by a technician if any LG washing machine error codes persist.

FF error on your LG washer? Yeah, it could be the main control board acting up. When it’s not working right, it mightn’t catch freezing problems like it should.

To fix this, we’re gonna need to swap out that control board. But hey, don’t try this yourself – it’s a job for the pros. Here’s what we’d do:

1. First things first, unplug that machine and turn off the breaker. Safety first!
2. We gotta take off the top and front to get at the board. Your manual tell you how.
3. Then we disconnect all the wires and hoses from the board.
4. Unscrew it and lift it out real carefully.
5. Put in the new board, hook everything back up, and check for any washing machine errors.
6. Put the machine back together.
7. Turn it on and run a test to make sure it’s all good.

Look, I know it’s tempting to save some cash and do it yourself, but trust me, this ain’t a DIY job. You could mess up your machine even worse if you don’t know what you’re doing.

Overloaded washing machine

Putting too much laundry in the machine can lead to freezing issues, especially in a top load washer. Reduce the load size.

We’ve all been there – ya stuff too much laundry in the washer and bam, it freezes up! That pesky FF error pops up cause the drum’s so full it can’t drain right.

When this happens to us, here’s what we gotta do: consult the help library for potential washing machine error solutions.

First things first, we need to take some clothes out. The machine’s too heavy, ya know? Then we run a quick rinse and spin to get rid of extra water.

Now, here’s the trick – we pour some warm water in to help unfreeze everything and prevent any washing machine errors. The drain hose and pump can get all icy.

Oh, and don’t forget to wrap a warm wet towel around the water hose if its frozen too.

We should probably clean that drain filter while were at it. Sometimes junk gets stuck in there and messes things up.

If it’s still acting up, we just gotta be patient. Let it sit for like 30 minutes so everything can thaw out good. Then we try washing again.

FAQs